Full Servo Robots
MaxCW25-2500
Our MaxCW series is engineered for large tonnage molding machines ranging from (470-2,800 tons). The MaxCW series has a robust open carriage for a large payload capacity and a telescoping arm to fit under low ceilings.
The MaxCW is well equipped with standard features such as 4 Vacuum Circuits, 2 Gripper Circuits, 20 Spare Input/Output signals, Pneumatic “Flip” C-Axis Standard, Advanced Vibration Dampening, Supervisory Safety Circuit (STO) and More. If you have any questions about any of these features or if need help sizing a robot give us a call.
Features
Key Specifications
- IMM Range (tons):1400-2400
- Stroke Vertical (mm):2500
- Stroke Crosswise (mm)
- Stroke Angle
- Air Consumption:4
- Drive System:AC Servo Motor
- Gripper Angle:90
- Max Current (amps):13.6
- Max Load (kg):30
- Power Consumption (kva)
- Power Supply:480 VAC 3 Phase 60Hz
- Stroke Single Arm Strip (mm):1840
- Stroke Traverse (mm):4000
- Type:Telescoping Vertical Arm
- Weight (kg):1666
- Working Air Pressure (kg/cm):5~8
Standard Features
- Riser/Adapter Plate
- 4 Vacuum Circuits
- 2 Gripper Circuits
- 20 Spare Input/Output signals
- Pneumatic “Flip” C-Axis
- 3-Axis Synchronized Movement
- Absolute Encoders (faster robot programming)
- Advanced Vibration Dampening
- Supervisory Safety Circuit (STO)
- Compact Floor Mounted Electrical Cabinet for Easy Maintenance
- Fully unlocked robot pendant
- Large Mold Storage Capacity
- Programs Stored in Cabinet, Not Pendant (data not lost if pendant damaged)
- 26 ft (8 m) Long Pendant Cable for Maneuverability While Programming
- Advanced Mold & Vertical Arm Protection
- Quick Change Universal Mounting Plate on Vertical Arm
- Euromap Adapter for Both 12 & 67 Molding Machines
- Telescoping Vertical Arm for Low Height Clearance
Options
- Additional Vacuum Circuit with Detection*
- Additional Gripper Circuit*
- Expanded I/O*
- Pneumatic Wrist Rotate 10kg, 18kg, & 30kg*
- Extended Traverse
- Additional Servo “A + C” Axis 18kg, 30kg, 42kg, 60kg
- Additional Servo “B + C” Axis 18kg, 30kg, 42kg, 60kg
- Beam Mounted Electrical Cabinet
- Secondary Vertical Arm for 3-Plate Molds
- In-Line Take Out (Traverse Over Clamp)
- Custom End-Of-Arm-Tooling
- Downstream Equipment (Guarding, Conveyors, Labeling, Packaging, etc.)
Controls
- Highly responsive touch screen
- Simple & intuitive programming
- Seamless integration with various molding machine brands
- Fully unlocked end-user program access
- Create any unique motion sequence at the pendant without the need for factory assistance, special programming or off-line software
- Large storage space
- Simple uploading and downloading of programs with a standard USB port
- Lightweight, easy to operate handheld controller
- Bright full color split screen controller shows line by line programs on the left and programming information on the right
- Free edit mode
Applications
- Large tonnage and payload applications
- Insert applications
- Medical (clean room)
- Basic downstream processes (trimming, labeling, stacking, etc.)
Controls
- Highly responsive touch screen
- Simple & intuitive programming
- Seamless integration with various molding machine brands
- Fully unlocked end-user program access
- Create any unique motion sequence at the pendant without the need for factory assistance, special programming or off-line software
- Large storage space
- Simple uploading and downloading of programs with a standard USB port
- Lightweight, easy to operate handheld controller
- Bright full color split screen controller shows line by line programs on the left and programming information on the right
- Free edit mode
Similar Models
FAQ
- Is this the right robot for me ?+
If you have ANY questions about the best way to automate your molding process, PLEASE do not hesitate to give us a call. We have application engineers ready to help you select the best automation based on your needs.
- Do you provide application engineering? (more than just the robot itself)+
YES! Everything from a simple pick and place operation to a complex multi-machine cell application. We can provide everything you need from the End-of-Arm-Tooling all the way to downstream packaging.
- Do you offer training ?+
YES! Along with our standard on-site training when we start up the robot, ARI also offers classroom and scheduled on-site classes.
- Do I need to order a riser/mounting plate with my robot?+
NO! We include your machine specific riser/mounting plate with your robot purchase. Our engineers ensure your riser fits correctly with the robot mounting location on the stationary platen.
